2000A Camlok Connection Cabinet, aluminum NEMA 3R enclosure with pad-lockable swing door, powder coated ANSI 61 gray, UL listed, rated 600VAC or less. Six sets of Male Camloks 3P-5W input with color coded snap back covers. Lockable while in-use system.
KVA
Primary
Secondary
Amps
Main
2000A Camlok Connection Cabinet configuration:
-
0.090" Aluminum NEMA 3R enclosure, powder coated ANSI 61 gray
-
Indoor/Outdoor rated with corrosion resistant hardware
-
Pad-lockable main door with two 1/4 turn latches
-
Easy to remove gland plate to access permanent connection lugs
-
Plated copper buss bar.
-
Four sets of Male 400A 16 Series Camloks with color coded snap covers
-
Camlok color code can be ordered to match any low voltage configuration
-
Bottom access cable trap system with rodent trap door
-
Optional stainless steel leg kit for pad-mount applications
-
Multiple conduit entry space (Bottom, top, left side, right side or rear)
Overall dimensions*:
43.0"H x 19.25" D x 38.0" W (Approximate 160lbs)
*All measurements are approximate and for estimation purposes only.
Specifications & Standards:
-
UL Industrial Control Panel Enclosure Listed
-
CAN/CSA C22.2 No.14 (Canada listed)
2000A Camlok Connection Cabinet feature:
-
Aluminum NEMA 250, Type 3R enclosure with polyurethane powder coat.
-
NEMA 3R rated for indoor/outdoor use, ideal for use in damp locations.
-
Pad lockable door for safety and controlled access.
-
Corrosion resistant material designed for industrial and harsh environments.
-
Color coded Male Camlok devices available any NEC color scheme.
-
Compact wall mountable design, full CAD drawing available upon request.
-
100 percent Ground of phase size.
-
Listed and labeled as defined in NFPA 70 ,marked for intended application.
-
UL Listed (Underwriters Laboratories, Inc.).
-
CAN/CSA C22.2 No.14 (Canada listed)
Camlok Connection Cabinet application:
-
For use as a quick connection port to a permanent installed switch gear and other similar electrical equipment such as: Automatic transfer switches, manual transfer switches, double throw safety switches, UPS systems, inter-locked switch boards or bolt switches.
-
Can be used as a quick connection port or junction point to access and service a stationary generator.
-
A Hipower generator connection cabinet can serve as a remote connection point to permanent installed generators and switch gear, reducing set up time and the needs to bring extra temporary cable runs when restoring power with a towable generator.
