
HDI-300F T6U
300 kW Standby Generator set Open Skid
Powered by: FPT_IVECO
Alternator: STAMFORD
Three phase | 60 Hz | Diesel | TIER III
- Engine Specifications 1.800 r.p.m.
- Rated Output: 287kW prp ; 317kW standby
- Manufacturer: FPT_IVECO
- Model: C10TE1D
- Engine Type: 4-stroke diesel
- Injection Type: Direct
- Aspiration Type: Turbocharged and after-cooled
- Number of cylinders and arrangement: 6-L
- Bore and Stroke: 125 x 140 mm
- Displacement: 10,3 L
- Cooling System: Liquid (water + 50% glycol)
- Lube Oil Specifications: ACEA E3 - E5
- Compression Ratio: 16,5 : 1
- Fuel Consumption ESP: 22.11 Gal/h
- Fuel Consumption 100% PRP: 20.18 Gal/h
- Fuel Consumption 80 % PRP: 16.85 Gal/h
- Fuel Consumption 50 % PRP: 11.54 Gal/h
- Lube oil consumption with full load: 0,5 % of fuel consumption
- Total oil capacity including tubes, filters 30 L
- Total coolant capacity: 63 L
- Governor Type Electrical
- Air Filter Type Dry
- Inner diameter exhaust pipe: 102 mm
- Generator: STAMFORD
- Model: S4L1D.E41
- Poles: 4
- Connection type (standard): Star-series
- Mounting type: S-1 14"
- Insulation: H class
- Enclosure (according IEC-34-5): IP23
- Exciter system: Self-excited, brushless
- Voltage regulator: A.V.R. (Electronic)
- Bracket type: Single bearing
- Coupling system: Flexible disc
- Coating type: Standard (Vacuum impregnation)
- - EXHAUST SYSTEM.
- Maximum exhaust temperature: 926.6 ºF
- Exhaust Gas Flow: 0,535 kg/s
- Maximum allowed back pressure: 5 kPa
- Heat dissipated by exhaust pipe: 675 KCal/Kwh
- - NECESSARY AMOUNT OF AIR.
- Intake air flow: 909 scfm
- Cooling Air Flow: 16,315 scfm
- Alternator fan air flow: 2,034 scfm
- - STARTING SYSTEM.
- Starting power: 5.5 kW
- Starting power: 7.38 HP
- Recommended battery: 185 x 2 Ah
- Auxiliary Voltage: 24 Vdc
- - FUEL SYSTEM
- Fuel Oil Specifications: Diesel
- - DIMENSIONS.
- Length: 133.07 in
- Height: 69 in
- Width: 55.12 in
- Maximum shipping volume: 290.64 ft3
- Dry weight: 5,915 Lbs