HDI-350F

 

HDI-350F

350 kW Standby Generator set Open Skid

Powered by: FPT_IVECO
Alternator: STAMFORD

 

Three phase | 60 Hz | Diesel | TIER III

 

 

  • Engine Specifications 1.800 r.p.m.
  • Rated Output: 337kW prp ; 371kW standby
  • Manufacturer: FPT_IVECO
  • Model: C13TE3X
  • Engine Type: 4-stroke diesel
  • Injection Type: Direct
  • Aspiration Type: Turbocharged and after-cooled
  • Number of cylinders and arrangement: 6 - L
  • Bore and Stroke: 135 x 150 mm
  • Displacement: 12,88 L
  • Cooling System: Liquid (water + 50% glycol)
  • Lube Oil Specifications: ACEA E3 - E5
  • Compression Ratio: 16,5:1
  • Fuel Consumption ESP: 27.02 Gal/h
  • Fuel Consumption 100% PRP: 24.49 Gal/h
  • Fuel Consumption 80 % PRP: 21.74 Gal/h
  • Fuel Consumption 50 % PRP: 14.34 Gal/h
  • Lube oil consumption with full load: 0,5 % of fuel consumption
  • Total oil capacity including tubes, filters 35 L
  • Total coolant capacity: 67 L
  • Governor Type Electrical
  • Air Filter Type Dry
  • Inner diameter exhaust pipe: 108 mm
  • - GENERATOR.
  • Poles: 4
  • Connection type (standard): Star-series
  • Mounting type: S-1 14"
  • Insulation: H class
  • Enclosure (according IEC-34-5): IP23
  • Exciter system: Self-excited, brushless
  • Voltage regulator: A.V.R. (Electronic)
  • Bracket type: Single bearing
  • Coupling system: Flexible disc
  • Coating type: Standard (Vacuum impregnation)
  • - EXHAUST SYSTEM.
  • Maximum exhaust temperature: 1076 ºF
  • Maximum allowed back pressure: 5 kPa
  • Heat dissipated by exhaust pipe: 733 KCal/Kwh
  • - NECESSARY AMOUNT OF AIR.
  • Intake air flow: 1,195 scfm
  • Cooling Air Flow: 19,070 scfm
  • Alternator fan air flow: 1,949 scfm
  • - STARTING SYSTEM.
  • Starting power: 6 kW
  • Starting power: 8.05 HP
  • Recommended battery: 185 x 2 Ah
  • Auxiliary Voltage: 24 Vdc
  • - FUEL SYSTEM
  • Fuel Oil Specifications: Diesel
  • - DIMENSIONS.
  • Length: 133.07 in
  • Height: 69 in
  • Width: 55.12 in
  • Maximum shipping volume: 290.64 ft3
  • Dry weight: 5,915 Lbs