English
HDA-250F T6
250 kW Standby Generator set Open Skid
Powered by: FPT_IVECO
Alternator: STAMFORD
Three phase | 60 Hz | Diesel | TIER III
- Engine Specifications 1.800 r.p.m.
- Rated Output: 253,6kW prp ; 280kW standby
- Manufacturer: FPT_IVECO
- Model: C87TE1D
- Engine Type: 4-stroke diesel
- Injection Type: Direct
- Aspiration Type: Turbocharged and after-cooled
- Number of cylinders and arrangement: 6-L
- Bore and Stroke: 117 x 135 mm
- Displacement: 8,7 L
- Cooling System: Liquid (water + 50% glycol)
- Lube Oil Specifications: ACEA E3 - E5
- Compression Ratio: 16,5 : 1
- Fuel Consumption ESP: 19.1 Gal/h
- Fuel Consumption 100% PRP: 16.99 Gal/h
- Fuel Consumption 80 % PRP: 14.27 Gal/h
- Fuel Consumption 50 % PRP: 10.25 Gal/h
- Lube oil consumption with full load: 0,5 % of fuel consumption
- Total oil capacity including tubes, filters 28 L
- Total coolant capacity: 63 L
- Governor Type Electrical
- Air Filter Type Dry
- Inner diameter exhaust pipe: 102 mm
- Generator: STAMFORD
- Model: S4L1S-C4
- Poles: 4
- Connection type (standard): Star-series
- Mounting type: S-1 14"
- Insulation: H class
- Enclosure (according IEC-34-5): IP23
- Exciter system: Self-excited, brushless
- Voltage regulator: A.V.R. (Electronic)
- Bracket type: Single bearing
- Coupling system: Flexible disc
- Coating type: Standard (Vacuum impregnation)
- - EXHAUST SYSTEM.
- Maximum exhaust temperature: 932 ºF
- Exhaust Gas Flow: 0,432 kg/s
- Maximum allowed back pressure: 5 kPa
- Heat dissipated by exhaust pipe: 668 KCal/Kwh
- - NECESSARY AMOUNT OF AIR.
- Intake air flow: 735 scfm
- Cooling Air Flow: 13,773 scfm
- Alternator fan air flow: 2,098 scfm
- - STARTING SYSTEM.
- Starting power: 4.5 kW
- Starting power: 6.04 HP
- Recommended battery: 185 x 2 Ah
- Auxiliary Voltage: 24 Vdc
- - FUEL SYSTEM
- Fuel Oil Specifications: Diesel
- - DIMENSIONS.
- Length: 124.02 in
- Width: 46.85 in