
HDI-80F T6U
83 kW Standby Generator set Open Skid
Powered by: FPT_IVECO
Alternator: STAMFORD
Three phase | 60 Hz | Diesel | TIER III
- Engine Specifications 1.800 r.p.m.
- Rated Output: 86,7kW prp ; 95,3kW standby
- Manufacturer: FPT_IVECO
- Model: NEF45TM2X
- Engine Type: 4-stroke diesel
- Injection Type: Direct
- Aspiration Type: Turbocharged and after-cooled
- Number of cylinders and arrangement: 4-L
- Bore and Stroke: 104 x 132 mm
- Displacement: 4,5 L
- Cooling System: Liquid (water + 50% glycol)
- Lube Oil Specifications: ACEA E3 - E5
- Compression Ratio: 17,5:1
- Fuel Consumption ESP: 6.84 Gal/h
- Fuel Consumption 100% PRP: 6.5 Gal/h
- Fuel Consumption 80 % PRP: 5.28 Gal/h
- Fuel Consumption 50 % PRP: 3.51 Gal/h
- Lube oil consumption with full load: 0,5 % of fuel consumption
- Total oil capacity including tubes, filters 12,8 L
- Total coolant capacity: 18,5 L
- Governor Type Mechanical
- Air Filter Type Dry
- Inner diameter exhaust pipe: 70,3 mm
- Generator: STAMFORD
- Model: UCI224G
- Poles: 4
- Connection type (standard): Star-series
- Mounting type: S-3 11"1/2
- Insulation: H class
- Enclosure (according IEC-34-5): IP23
- Exciter system: Self-excited, brushless
- Voltage regulator: A.V.R. (Electronic)
- Bracket type: Single bearing
- Coupling system: Flexible disc
- Coating type: Standard (Vacuum impregnation)
- - EXHAUST SYSTEM.
- Maximum exhaust temperature: 887 ºF
- Maximum allowed back pressure: 5 kPa
- Heat dissipated by exhaust pipe: 713 KCal/Kwh
- - NECESSARY AMOUNT OF AIR.
- Intake air flow: 306 scfm
- Cooling Air Flow: 6,357 scfm
- Alternator fan air flow: 595 scfm
- - STARTING SYSTEM.
- Starting power: 3 kW
- Starting power: 4.02 HP
- Recommended battery: 100 Ah
- Auxiliary Voltage: 12 Vdc
- - FUEL SYSTEM
- Fuel Oil Specifications: Diesel
- - DIMENSIONS.
- Length: 85 in
- Height: 60 in
- Width: 42.91 in
- Maximum shipping volume: 127.13 ft3
- Sound pressure level: 71 ± 2,4 dB(A)@7m