
HRIW-45 T4F
34 kVA Prime Generator set Mobile
Powered by: ISUZU
Alternator: STAMFORD
Single phase | 60 Hz | Diesel | FINAL TIER IV
- Engine Specifications 1.800 r.p.m.
- Rated Output: 44kW prp ; 49kW standby
- Manufacturer: ISUZU
- Model: 4LE2X
- Engine Type: 4-stroke diesel
- Injection Type: Direct, common rail
- Aspiration Type: Turbocharged and after-cooled
- Number of cylinders and arrangement: 4-L
- Bore and Stroke: 85 x 96 mm
- Displacement: 2,179 L
- Cooling System: Liquid (water + 50% glycol)
- Lube Oil Specifications: 10W40 CJ4 / CK4 ACEA E9
- Compression Ratio: 17,6:1
- Total oil capacity: 10,4 L
- Total coolant capacity: 14,73 L
- Governor Type Electrical
- Air Filter Type Dry
- Inner diameter exhaust pipe: 37 mm
- EPA TIER 4 FINAL
- Exhaust gases after-treatment DOC
- Air Filter Restriction Indicator
- Crankcase Ventilation Filter
- Extended Maintenance Interval up to 500 Hrs.
- Coolant Drain Extension
- 12V electrical system
- Dry air filter (medium duty)
- Low coolant level sensor (Optional)
- Hydronic heater (5 kw) (Optional)
- Oil Pan Heater (Optional)
- Generator: STAMFORD
- Model: UCI224D
- Poles: 4
- Connection type (standard): Double delta
- Mounting type: S-4 10"
- Insulation: H class
- Enclosure (according IEC-34-5): IP23
- Exciter system: Self-excited, brushless
- Voltage regulator: A.V.R. (Electronic)
- Bracket type: Single bearing
- Coupling system: Flexible disc
- Coating type: Standard (Vacuum impregnation)
- - SOUNDPROOFED VERSION.
- Anti-leakage chassis, predisposed to retain liquids (retention tray)
- Oversized chassis to protect the bodywork
- Double-walled fuel tank
- Fuel level gauge
- External emergency stop switch
- Bodywork made from high quality steel plate
- Low noise emissions level
- Full access for maintenance (water, oil and filters, no need to remove the canopy)
- Reinforced lifting hooks for crane hoisting
- Chassis ready for future mobile kit installation
- Trailer prepared for road transportation
- 3-Way Fuel valve 3/8" (Optional)
- Draw bar with ball coupling and ring (Optional)
- - ELECTRICAL SYSTEM.
- Water Jacket Heater
- Main line ABB UL listed circuit breaker for overload protection
- Leakage detector
- Buck Transformer for Auxiliary 120VAC Outlets
- Shunt Trip on MLCB
- Distribution Panel 400A
- 6 Amp Battery charger, 12V DC, UL Listed (Optional)
- 10 Amp battery charger, 12/24V DC, UL Listed (Optional)
- Battery Blanket (Optional)
- Control Panel Heater (Optional)
- MLCB Auxiliary Contacts (Optional)
- - EXHAUST SYSTEM.
- Maximum exhaust temperature: 896 ºF
- Exhaust Gas Flow: 3,65 kg/s
- Maximum allowed back pressure: 7,5 kPa
- - NECESSARY AMOUNT OF AIR.
- Intake air flow: 105 scfm
- Cooling Air Flow: 5,297 scfm
- Alternator fan air flow: 595 scfm
- - STARTING SYSTEM.
- Starting power: 2 kW
- Starting power: 2.68 HP
- Recommended battery: 115 Ah
- Auxiliary Voltage: 12 Vdc
- Starter current peak: 850 A
- - FUEL SYSTEM
- Fuel Oil Specifications: Diesel
- Maximum power suction pump: 51,7 mm Hg
- Maximum return feed pump: 25,5 mm Hg
- Fuel Tank: 80 Gal
- - DIMENSIONS.
- Length: 88.58 in
- Height: 62 in
- Width: 37.4 in
- Maximum shipping volume: 119.36 ft3
- Dry weight: 2,401 Lbs
- Fuel tank capacity: 80 Gal
- Autonomy: 42 Hours
- Sound pressure level: 65 ± 2,4 dB(A)@7m