HRJW-240 T4F

 

HRJW-240 T4F

240 kVA Prime Generator set Mobile

Powered by: JOHN DEERE
Alternator: STAMFORD

 

Three phase | 60 Hz | Diesel | FINAL TIER IV

 

 

  • Engine Specifications 1.800 r.p.m.
  • Rated Output: 220kW prp ; 241kW standby
  • Manufacturer: JOHN DEERE
  • Model: 6068HFG06
  • Engine Type: 4-stroke diesel
  • Injection Type: Direct, common rail
  • Aspiration Type: Turbocharged and after-cooled
  • Number of cylinders and arrangement: 6-L
  • Bore and Stroke: 106 x 127 mm
  • Displacement: 6,8 L
  • Cooling System: Liquid (water + 50% glycol)
  • Lube Oil Specifications: 10W40 CJ4 / CK4 ACEA E9
  • Compression Ratio: 16,7:1
  • Total oil capacity: 32,5 L
  • Governor Type Electrical
  • Air Filter Type Dry
  • Low coolant level sensor
  • EPA TIER 4 FINAL
  • DEF Tank
  • Air Filter Restriction Indicator
  • Extended Maintenance Interval up to 500 Hrs.
  • Coolant Drain Extension
  • 12V electrical system
  • Dry air filter (medium duty)
  • Radiator with pusher fan
  • Hot parts protection
  • Moving parts protection
  • Hydronic heater (5 kw) (Optional)
  • Oil Pan Heater (Optional)
  • Generator: STAMFORD
  • Model: UCDI274J
  • Poles: 4
  • Connection type (standard): Star - Parallel
  • Mounting type: S-2 11,5"
  • Insulation: H class
  • Enclosure (according IEC-34-5): IP23
  • Exciter system: Self-excited, brushless
  • Voltage regulator: A.V.R. (Electronic)
  • Bracket type: Single bearing
  • Coupling system: Flexible disc
  • Coating type: Standard (Vacuum impregnation)
  • - SOUNDPROOFED VERSION.
  • Anti-leakage chassis, predisposed to retain liquids (retention tray)
  • Oversized chassis to protect the bodywork
  • Chassis with integrated fuel tank
  • Double-walled fuel tank
  • Fuel level gauge
  • External emergency stop switch
  • Bodywork made from high quality steel plate
  • Low noise emissions level
  • Full access for maintenance (water, oil and filters, no need to remove the canopy)
  • Reinforced lifting hooks for crane hoisting
  • Chassis ready for future mobile kit installation
  • 3-Way Fuel valve 3/8" (Optional)
  • Trailer prepared for road transportation (Optional)
  • Draw bar with ball coupling and ring (Optional)
  • - ELECTRICAL SYSTEM.
  • Battery Switch
  • Water Jacket Heater
  • Main line ABB UL listed circuit breaker for overload protection
  • Leakage detector
  • Buck Transformer for Auxiliary 120VAC Outlets
  • Shunt Trip on MLCB
  • MLCB Auxiliary Contacts
  • Distribution Panel 800A
  • Ground connection electrical installation with connection ready for ground spike (not supplied)
  • 6 Amp Battery charger, 12V DC, UL Listed (Optional)
  • 10 Amp battery charger, 12/24V DC, UL Listed (Optional)
  • Battery Blanket (Optional)
  • Control Panel Heater (Optional)
  • - EXHAUST SYSTEM.
  • Maximum exhaust temperature: 752 ºF
  • Exhaust Gas Flow: 1,119 cfm
  • Maximum allowed back pressure: 19,6 kPa
  • - NECESSARY AMOUNT OF AIR.
  • Intake air flow: 521 scfm
  • Alternator fan air flow: 1,462 scfm
  • - STARTING SYSTEM.
  • Starting power: 4.8 kW
  • Starting power: 6.44 HP
  • Recommended battery: 290 Ah
  • Auxiliary Voltage: 12 Vdc
  • Starter current peak: 1280 A
  • - FUEL SYSTEM
  • Fuel Oil Specifications: Diesel
  • Maximum power suction pump: 225 mm Hg
  • Maximum return feed pump: 150 mm Hg
  • Fuel Tank: 130 Gal
  • - DIMENSIONS.
  • Length: 145 in
  • Height: 84 in
  • Width: 53.94 in
  • Maximum shipping volume: 382.1 ft3
  • Dry weight: 8,200 Lbs
  • Fuel tank capacity: 130 Gal
  • Autonomy: 15 Hours
  • Sound pressure level: 72 ± 2,4 dB(A)@7m