HIPOWER SYSTEMS a Yanmar Company, Generator Sets
Region AMERICA
    Back
    < >

    New Power Nodes for the HNI Spark-Ignited Standby Series.

    HIPOWER SYSTEMS has launched new models (HNI-80, HNI-100, HNI-125, HNI-150 & HNI-200) to the HNI Spark-Ignited Standby Series.


    HIPOWER SYSTEMS launched new models to the HNI Spark-Ignited Standby Series.

    HIPOWER SYSTEMS has launched new models to the Heavy Duty Industrial Natural Gas (HNI) Series - HNI-80, HNI-100, HNI-125, HNI-150 & HNI-200 are the new models released.  The HNI series are specifically designed for use with data management, healthcare, construction, or any other critical installation that requires a standby generator. 

    Discover Our New HNI Power Nodes!

    Available in voltages ranging from 240/120 1PH to 600/347 3PH, the HNI Series can support any low voltage 
    stationary application.

    VIEW MODELS

    Powerful Features| Top Brand Components



    Reliable Engine

    HIPOWER SYSTEMS uses Power Solutions International (PSI) as the preferred partner for the prime mover on the HNI series. The HNI-80 and HNI-100 are using the 5.7L turbocharged and 5.7L turbocharged intercooled engines while the HNI-125, 150 and HNI-200 are using the 8.8L turbocharged and 8.8L turbocharged intercooled engines. All engines, used in the new HNI models, are designed for use at 1800 RPM in 60HZ emergency standby applications.  EPA-certified for emergency standby applications.


    The engines are coupled to four-pole Stamford Alternators with AS440 voltage regulators to provide excellent transient voltage response. However, if greater transient voltage response is required then the HNI series can be optioned with a permanent magnet generator and MX341 or MX321 voltage regulator.


    CONTROLLERS
    Genset functions are controlled through a Deepsea DSE 7410 MKII controller. The controller is an auto start control module suitable for a wide variety of single genset applications. The DSE7410 MKII has built in ethernet communication providing advanced remote monitoring as well as being able to be integrated into a building management system via MODBUS.

    CIRCUIT BREAKER OPTIONS

    • Thermal-Magnetic trip 80% and 100% rated  
    • LS/I Electronic trip 80% and 100% rated  
    • LSI Electronic trip 80% and 100% rated   
    • LSIG Electronic trip 80% and 100% rated  
    • Shunt Trip  
    • Auxiliary Contacts for Main & Secondary Breaker.   
    • Second Main Line Circuit Breaker  
    • Mechanical Lugs

    Fuel System Flexibility

    The HNI-100 and HNI-150 have the flexibility and capability, when appropriately optioned, to be able to run in different fuel configurations which are Liquid Propane, Liquid Propane Vapor, and Dual Fuel in addition to natural gas.

    “With Dual Fuel operation, meaning the genset’s primary fuel source is natural gas and secondary fuel source is LP or LPV, this gives the customer the ability of using their existing natural gas supply to their building while also providing the security of having onsite fuel storage with liquid propane in the case of a disaster and the natural gas supply to the building has been shut-off” - Said, EJ Leblanc - Sales Engineering Director.


    FAST & EASY SERVICING.

    The HNI series were also designed for fast and easy servicing. The gensets have four access doors and easy access to the catalytic converter allowing the service technicians access to standard service points as well as oil and coolant drains. In addition, the enclosures are fabricated and assembled at HIPOWER’s Olathe, KS facility, using 11-gauge steel powder coated with a finish that exceeds a 1400-hr salt spray test to ensure the requirements of the stationary market are met or surpassed.


    “Just like in every HIPOWER generator, service accessibility is a forefront in the design process of the HNI series. Without a successful service schedule, emergency standby generators cannot provide power when it is needed most and therefore accessibility to common service items is critical to the success of that schedule.” said Rafael Acosta, President at HIPOWER SYSTEMS.

    The HNI series is designed to be used in the stationary and specifying markets with options ranging from fuel types, enclosures, enclosure accessories, I/O expansions, and breaker types, along many other options creating an almost unlimited number of combinations to be able to meet almost any engineering specification.





    The HNI series are specifically designed for use with data management, healthcare, construction, or any other critical installation that requires a standby generator. 

    Available in voltages ranging from 240/120 1PH to 600/347 3PH, the HNI series can support any low voltage stationary application.

                         

    The HNI-80 to HNI-200 were designed to further bolster the already existing HIPOWER SYSTEMS’ dependable HNI gas product line which already includes gensets ranging from 450-1000 kW.

    DOWNLOAD BROCHURE

    WE STAND BEHIND OUR SPARK-IGNITED SERIES.    

    We stand behind our HNI PRODUCT LINE with a strong 2 Years or 2,000 hours (whichever occurs first) parts & labor.

    At HIPOWER, we make it easy.  

    Contact us today and experience the HIPOWER difference.

    CONTACT US
    Request Info

    Request Info

    By filling in this form you consent to have your information processed and recorded on our system and for the management of your relationship as a user, client, or candidate for employment Hipowersystems.com.
    /privacy-policy/eng.html

    Indicate the type of request

     privacy policy *
    * Required fields